Tools are available on either 8mm or .500 shanks.

8mm shank tools are vented, except sizes .090 and smaller.  Sizes .090 and smaller vented upon request.

  • Tolerance on forms + or - .0002"

  • Tighter tolerances available at additional cost.

  • Tolerance on shanks -.0003"

  • Tools available in push and wobble style.

 

RAYCO PROCESSED BROACHES MATERIAL TYPES

RAYCO #8 :  Our standard and most popular material.   It will cover a wide range of jobs and is superior to other commercially available hardened materials used for broach operations.  It is readily available in a wide range of sizes.

RAYCO #2:  This is a premium general purpose material exhibiting a very good combination of hardness, and wear resistance for broaching applications.   

RAYCO #7 :  This is a special purpose material exhibiting very high hardness, combined with exceptional abrasion resistance, and toughness.  It is intended for use on materials with tensile strengths exceeding 190 KSI and up to 50 Hrc.    Example: Cobalt-Chrome, Custom 455, Biodur 108 & 22-13-5, 17-4 H900, Strain Hardened 316, Titanium, Inconel, Monel, etc.

#8 WOBBLE HEX BROACH

8mm shank

#8 PUSH HEX BROACH

1/2 inch shank

#7 PUSH HEX BROACH

8mm shank

#7 PUSH HEX BROACH

8mm shank

#2 WOBBLE HEX BROACH

8mm shank